SKB Standard Rack Case, Stackable Effects Rack, 4U

Product Overview

The SKB SKB-19-4U Standard Rack Mount Case is the industry standard for lightweight, tough, durable and stackable professional rack cases. The Standard Rack Mount Cases are perfect for audio equipment, DJ equipment, computers and electronic gear designed for rail mounting. The Standard Rack Mount Cases feature tough exterior shells, front and rear lids, recessed handles, heavy-duty recessed latches and molded-in ribs for solid stackability.

Accessories

• RD200L - SKB 2U Rack Drawer, Lock
• RD200R - SKB 2U Rack Drawer, Latch
• RD300R - SKB 3U Rack Drawer, Latch
• RD400L - SKB 4U Rack Drawer, Lock
• RD400R - SKB 4U Rack Drawer, Latch
• RD500L - SKB 5U Rack Drawer, Lock
• SS50-14 - SKB Sliding Shelf

Similar Products

• 1SKB19-2U - SKB Stackable Rack
• 1SKB19-3U - SKB Stackable Rack
• 1SKB19-6U - SKB Stackable Rack
• 1SKB19-8U - SKB Stackable Rack
• 1SKB19-10U - SKB Stackable Rack
• 1SKB19-12U - SKB Stackable Rack

Specifications

• Colors:   Black
• Material:   Therform molded ultra-high molecular weight polyethylene
• Length (Inside):   19.00 in. (482.6mm)
• Width (Inside):   15.63 in. (396.9mm)
• Height (Inside):   7.00 in. (177.8mm)
• Rackmount:   Yes
• Rack Spaces:   4 U
• Weight:   16.0 lbs. (7.3kg)
• Handles:   2    (Recessed)
• Latches:   2    (Twist latches)
• ATA Rated:   Yes
• Ships UPS:   Yes
• Special Features:   Rubber feet

Detailed Information

The SKB SKB-19-4U Standard Rack Mount Case is the industry standard for lightweight, tough, durable and stackable professional rack cases. The Standard Rack Mount Cases are perfect for audio equipment, DJ equipment, computers and electronic gear designed for rail mounting. The Standard Rack Mount Cases feature tough exterior shells, front and rear lids, recessed handles, heavy-duty recessed latches and molded-in ribs for solid stackability.

Lightweight, yet strong, the SKB-19 inch racks are made of military grade 50-100 ultra high molecular weight polyethylene material. They are stackable and less than half the weight of wooden racks. The draw- tight latch front and rear covers are gasket-sealed to keep out moisture and dirt. With the front cover removed, the 19 inch mounting flange is close to the edge, which makes it extremely easy to visually read the dials and LCD screens on the front of your equipment. The snap-in A/N case hardened hardware allows for easy replacement of mounting nuts if failure should ever occur. Each rack comes with sufficient mounting hardware plus spares.

Features:

• Tough exterior shells
  
• Front and rear lids
  
• Recessed latches