SKB Military Standard Injection Molded Case

Product Overview

The SKB Military Standard Injection Molded Utility Cases are rugged and tough shipping cases that meet exacting military case specifications. Water and dust tight, corrosion resistant, impact resistant, and injection molded from ultra high-strength polypropylene copolymer resin, these cases are perfect for electronic equipment, sensitive instruments, tools, and anything else that requires a protective environment. The SKB Military Standard Injection Molded Cases feature a continuous molded-in hinge, heavy-duty latches and handles, are fully stackable and come in no foam, foam, and padded divider options.

Similar Products

• 3I-1813-5B - SKB Laptop Case
• 3I-2011-7B-E - SKB Military Case
• 3I-2015-10B-E - SKB Military Case
• 3I-2015-7B-E - SKB Military Case

Specifications

• Colors:   Black
• Material:   Injection molded ultra high-strength polypropylene copolymer resin
• Length (Inside):   12.00 in. (304.8mm)
• Width (Inside):   9.00 in. (228.6mm)
• Height (Inside):   4.50 in. (114.3mm)
• Length (Outside):   14.00 in. (355.6mm)
• Width (Outside):   12.00 in. (304.8mm)
• Height (Outside):   6.25 in. (158.8mm)
• Base Depth (Inside):   3.00 in. (76.2mm)
• Lid Depth (Inside):   1.50 in. (38.1mm)
• Cubed Foam:   Yes
• Padded Dividers:   Yes
• Weight:   5.0 lbs. (2.3kg)
• Weight with Foam:   6.0 lbs. (2.7kg)
• Watertight:   Yes
• Hinges:   1    (Continuous molded-in)
• Handles:   1
• Latches:   2    (Heavy-duty )
• ATA Rated:   Yes
• Military Grade:   Yes
• Ships UPS:   Yes
• Airline Carry-On:   Yes

Detailed Information

The SKB Military Standard Injection Molded Utility Cases are rugged and tough shipping cases that meet exacting military case specifications. Water and dust tight, corrosion resistant, impact resistant, and injection molded from ultra high-strength polypropylene copolymer resin, these cases are perfect for electronic equipment, sensitive instruments, tools, and anything else that requires a protective environment. The SKB Military Standard Injection Molded Cases feature a continuous molded-in hinge, heavy-duty latches and handles, are fully stackable and come in no foam, foam, and padded divider options.

These new Injection Molded Mil-Standard Utility Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (IP67) that is resistant to corrosion and impact damage. A continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), stack securely and the cases are padlockable with a customer supplied lock. The 3I-1209-4 Injection Molded Mil-Standard Utility Case is perfect for small electronics, pistols or OEM applications. These new Mil-Standard Utility Cases are sized to accommodate airline regulations for traveling in the overhead luggage compartments for added safety to technical gear.

Features:

• Meets airline carry-on size restrictions
  
• Continuous, molded-in hinge
  
• Watertight, dust tight, submersible
  
• Unique "trigger release" latch system
  
• Comfortable snap down molded handle
  
• Pressure equalization valve
  
• Stackable