Pelican 0350 Cube Case - Shipping and Transport Case

Product Overview

Pelican 0350 cases make ideal electronic equipment cases, tool cases, waterproof camera cases, A/V cases, medical equipment cases and much more. The perfect watertight case for small electronics and equipment, Pelican cases are waterproof, dustproof and crushproof, and provide an excellent shock-resistant barrier for any delicate equipment. The Pelican 0350 Cube Case comes with optional pre-scored foam or padded dividers to provide the perfect fit for your equipment.

Accessories

Specifications

Colors: Black, Desert Tan, OD Green
Material: Injection molded structural copolymer polypropylene
Length (Inside): 20.00 in. (508.0mm)
Width (Inside): 20.00 in. (508.0mm)
Height (Inside): 20.00 in. (508.0mm)
Length (Outside): 22.50 in. (571.5mm)
Width (Outside): 22.44 in. (569.9mm)
Height (Outside): 21.25 in. (539.8mm)
Base Depth (Inside): 18.45 in. (468.6mm)
Lid Depth (Inside): 5.00 in. (127.0mm)
Cubed Foam: Yes - Optional
Padded Dividers: Yes - Optional
Weight: 32.0 lbs. (14.5kg)
Watertight: Yes
Hinges: 2
Handles: 2
Pull Handle: Yes
Latches: 6 (ABS)
Wheels: Yes - Optional
ATA Rated: Yes
Military Grade: Yes
Ships UPS: Yes
Minimum Temperature: -10° F (-23.3° C)
Maximum Temperature: 210° F (98.9° C)
Special Features: Pick 'n' Pluck foam, padded dividers and no foam options standard, Automatic purge valve; neoprene o-ring

Detailed Information

Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case™ that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).

This case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association).

	Optional Padded Dividers The optional padded dividers for the Pelican 350 Case permit the easy loading of photographic or other equipment while still offering the ultimate in protection. The dividers are movable and removable, providing an almost limitless number of configurations to suit your particular needs. The top tray pulls out easily for access to the lower tray.
	Optional Mobility Kit The Pelican 350 Case Mobility Kit provides a unique way to convert your case into a pull-handle wheeled case and back again in just seconds. The kit includes 4 user-installable base plates which remain in place after installation. The casters can then be snapped in or out of the plates in seconds, giving you the ultimate in flexibility. When not in use, the wheels can be easily stowed inside the case.
	Stronger By Design The Pelican Protector Case uses solid wall construction and open cell core design to give you an indestructible travel case. The lightweight ultra high-impact .25" structural copolymer polypropylene outer walls are four times stronger than a conventional injection molded case. The non-corrosive stainless steel pins securely attach the handles, latches and hinges to the body.
	Automatic Purge Valve The exclusive Automatic Purge Valve is a semi-permeable membrane, which resists water ingress and automatically releases pressure in case of atmospheric pressure changes. That makes it perfect for holding camera lens because it will help keep them dry-preventing fungus from growing on your expensive lens.
	Smarter, Easier Latches Introducing the new easy-to-open Double-Throw Latch. It's the classic "C" clamp design with some clever physics thrown in. The secondary movement works like a pry-bar to begin the release and offers plenty of leverage to open with a light pull. With a failure threshold of nearly 400 lbs. for each latch, you could drive a car over it without them failing.
	Optional Lid Organizer The optional Lid Organizer for the Pelican 350 Case gives you a convenient place to store all of the small items you need to take with you, such as notebooks, pens, pencils and other small equipment. The sturdy ballistic nylon mesh is divided into multiple zippered pockets.
	TSA-Accepted Padlocks Like the standard Pelican PeliLock, the TSA PeliLock is specifically designed for use with any Pelican case. The TSA PeliLock has been accepted for use by the Department of Homeland Security, acting as a combination lock for the user with a separate TSA-coded keyhole for baggage screeners. Now you can check your baggage through with confidence.
	Waterproof O-ring Seal The secret to a watertight case is its o-ring of course! The unique design of the Pelican case features a tongue and grove fit with a neoprene o-ring that acts like a dam - stopping water from invading the case. This helps make the case water and air tight up to 30 feet. The o-rings are removable and replaceable.

Features:

Atmospheric pressure purge valve
Watertight and airtight to 30 feet for the ultimate in protection
Constructed of light-weight space age structural resin with a neoprene o-ring seal and exclusive purge valve
Optional pre-scored pick n pluck foam or padded dividers (no cutting required)
Locking flanges
Massive multiple latches for absolute security
Comfortable molded fold down handle
Integral Personalized Nameplate engraved at additional cost
Custom colors and foam inserts fabricated on special order
Private label logos available

Materials:

Case
Copolymer Polypropylene Structural Resin tested to MIL STANDARD MIL-C-4150-J
Latches
ABS
O-Ring
Neoprene Sponge tested to Air Transportation Association Spec. 300
Pins
Stainless Steel
Foam
1.7 lb Polyurethane tested to NATO IP 67, IP 57 in accordance EN60529/91 & IEC60529/89
Purge Valve
ABS - Stainless Steel - Neoprene

HOME | FIND PRODUCTS
SHIPPING CASES | FLASHLIGHTS | KNIVES

MEI Research Corporation
43178 Business Park Drive, Suite 100, Temecula, CA 92590
Phone: (951) 326-3000 • Outside California: (800) 819-4245 • Fax: (951) 326-3040
E-Mail: sales@meiresearch.com
DOD Cage Code # 07HW3 GSA# GS-07F-5664R

Site designed by Softnet